XCT70-C8 水胶贴合(自动对位)设备

 常见问题    |      2019-08-18 20:12:24
XCT70-C8 水胶贴合(自动对位)设备

旭崇   XCT70-C8  水胶贴合(自动对位)设备

用途:本产品适用于各种硬质平面产品的硬对硬(HARD & HARD)贴合工艺;如触摸功能玻璃(SENSOR GLASS)与液晶屏(LCD PANEL)、钢化玻璃(COVER LENS)的组合贴合

The machine is used for HARD & HARD laminating process, such as laminating SENSOR GLASS and LCD PANEL, COVER LENS.

 

细节

自动对位平台 Platform

自动视觉系统组  Group of Vision System

自动贴合Z轴  Z-axis of Laminating

X-Y-Z点胶组  Group of X-Y-Z Dispensing

CCD调节组  Group of CCD adjusting

Z轴运动机构  Moving Group of Z-axis

光源调节机构  Adjusting Group of Light Source

点胶设置手柄  Controller of Dispensing

制锁机构   Locking Group

 

 

介绍

一、自动对位(硬对硬)贴合

Auto Alignment ( HARD & HARD) Laminating

人工将上产品放置送料轴治具中,定位OK后,下方支撑柱支撑

Put upper-side product on feeding fixture and positioning it.

送料轴将上产品送至压头正下方

Feeding axis moves to right under pressure head.

压头下降将上产品吸住,同时送料轴退回

Pressure head goes down to attach product, feeding axis return.

压头将上产品移动至CCD摄像位置,CCD抓取MARK点后升至待机位

Pressure head moves to CCD photographing position to catch MERK point, then stand by.

人工将下产品放置于2#载台上,并按下真空按钮将其吸附牢固

Put under-side product on 2# platform and press vacuum button to attach it.

下产品移至点胶位点胶。点胶完成

Under-side product moves to dispense.

下产品移至拍照位拍照,拍照OK,自动校正OK

Under-side product moves to photographing position, photographing and aligning automatically.

上产品下贴到位,贴合OK, UV灯开启固化,复位

Upper-side product goes down to laminate, laminating OK, turn on UV light to cure it. Then reset machine.

二、手动对位(硬对硬)贴合

Manual Alignment (HARD & HARD) Laminating

OK下产品放入3#平台上,点胶轴到位点胶

Put under-side product on 3# platform, dispensing axis moves to dispense.

载台移至CCD摄像位置,CCD实时显示产品图像

Platform moves to CCD photographing position.

人工调整X-Y-θ对位准确

Manually align through X-Y-θ adjuster.

按下启动键,压头到达贴合位贴合

Press start button to laminate.

贴合OK,人工下料

Laminating finish and take product.

重复以上工作

Repeat the above steps.

 

参数

输入电源:AC220V 50-60HZ

Input Power: AC220V 50-60HZ

额定功率:4.5KW

Rated Power: 18KW

外型尺寸:

Dimension:

程序控制:PLC+伺服+自动视觉

Controlling Program: PLC + Servo + Auto vision

贴合方式:点胶贴合

Ways of Laminating: Dispensing laminate

翻转方式:气缸翻转

Method of Rotate: Rotate by Cylinder

适用尺寸:300*300(可定制)

Available Size: 300*300 (can be customized)

控制单元:10寸人机界面

Controlling: 10-inch human-interface

对位方式:自动视觉对位+手动视觉对位

Alignment mode: Automatic visual alignment + Manual visual alignment

设备重量:700KG

Weight of Machine: 700KG

真空处理:外置真空

Vacuum Processing: External Vacuum

制锁:气动机械制锁

Locking System: Pneumatic Locking

 

特点

自动对位平台,通过视觉系统X-Y-θ自动识别精准对位

Platform can achieve accurate alignment through vision system.

自动视觉系统组,产品到位实现自动拍照自动对位自动贴合等功能

Vision system can photograph, align and laminate automatically.

自动贴合Z轴,对位OK通过伺服精准对位并配有缓冲气缸

Z-axis of laminating works with cushion cylinder and aligning through servo.

X-Y-Z点胶组,设备配有独立双工位,点胶系统轴位置可自由设置

The machine with independent working station and dispensing position can be set as needed.

CCD调节组,设备工位上配有手动对位视觉确保对位精准

Group of CCD adjusting guarantees the accuracy of alignment.

Z轴运动结构,设备平台可用微调架手]动对位,对位完成后伺服可精准贴合

Moving group of Z-axis can achieve accurate laminating.

光源调节机构,设备压力光源可实现单独调整

Light source can be adjusted independently.

点胶设置手柄,点胶控制系统通过手柄可设置点,线,弧等多种图形及自动储存配方

Controller of dispensing can set dispensing map like spot, straight line and circular arc and so on and save data automatically.

制锁机构,翻转平台到位后用气缸机器制锁保证贴合精度

Locking system guarantees the accuracy of laminating at help of cylinder.

 

流程

LOCA邦定  LOCA Bonding

 

 

辅料

无尘布 Dust-free cloth

手套 Glove

酒精 Ethanol

易撕贴 Pull tape

 

工具

酒精喷雾瓶  Sprayer